| MODEL |
Sinch 2.5 Ebike
|
| SPEED |
20 MPH
|
| PEDAL ASSIST | 4 Levels |
| RANGE | Up to 55 miles |
| WEIGHT | 68 lbs |
| TOTAL WEIGHT LIMIT | 300 lbs |
|
IDEAL USE
|
All-Terrain |
| FOLDING | Yes |
|
RIDER HEIGHT
|
4’11” – 6’2″
|
Technical Overview
Sinch 2.5 ships as a Class II ebike, with pedal assist and throttle. Sinch 2.5 will also operate with the throttle unplugged and removed, should you want to ride in an area where throttles are prohibited. Aventon ebikes are built to the IPX4 water-resistant standard. IPX4 means that your bike is resistant to water splashes from any direction. This means it’s OK to ride your ebike in light rain. It won’t be harmed by spray from a wet road or raindrops. Your ebike is not intended to be exposed to prolonged rain, be submerged, or subjected to a pressurized spray. Don’t use a pressure washer or sprayer to clean your ebike. *Max range determined using PAS Eco throughout flat terrain with a rider weight of 160 lb.
| FRAME |
6061 Single-Butted Folding Aluminum Alloy with Internal Battery
|
| FORK | Aventon coil fork with lock out and black stanchions |
| FRAME STYLE | Step-Through |
| Front Wheel | 20×4″, 36-spoke, double-wall aluminum fat tire rim, black finish, with a nutted axle, 13g stainless steel spokes (173mm NDS/175mm DS), 135mm spacing, Schrader valve |
| Rear Wheel | 20×4″, 36-spoke, double-wall aluminum fat tire rim, black finish, hub drive motor with a nutted axle, 12g stainless steel spokes (128mm NDS/127mm DS), 177mm spacing, Schrader valve |
| TUBES | Butyl Rubber, Schrader Valve |
| HUBS | Hubs: 36H Disc Nutted Front, Nutted Rear |
| TIRES | Innova IA-2579 20×4.0 |
| Front Brake Rotor | 180mm 6 bolt |
| Rear Brake Rotor | 180mm 6 bolt |
| BOTTOM BRACKET | Square Taper, Sealed, Dual-Sided Torque Sensor, 100×159.5mm |
| CRANKSET |
3pc, 170mm crank arm
|
| SHIFT LEVER | 8 Speed Trigger |
| CHAIN | 114 Link, 8 Speed |
| REAR DERAILLEUR | Aventon 8 speed |
| CASSETTE | 12-32T / 8 Speed Shimano CS HG200-8 |
| SADDLE | Aventon by Velo |
| SEATPOST | Aventon Suspension Seatpost, 30.9, 350mm Length |
| HANDLEBARS | Aluminum 25.4mm diameter, 580mm wide |
| HEADSET | Sealed Bearing Headset ZS44/28.6| ZS55/40 |
| GRIPS | Aventon glue on grips |
| STEM | Threadless, 31.8mm, 90mm |
| SEAT CLAMP | 34.9mm Quick Release |














Reviews
There are no reviews yet.